Search found 10 matches
- Sun Feb 03, 2019 8:42 pm
- Forum: MegunoLink
- Topic: sending commands from my interface panel to my board
- Replies: 4
- Views: 7885
Re: sending commands from my interface panel to my board
wish it was that simple. I had it configured that and it works sending over USB port. I will go back and change it so i can look in another place for the problem.
- Sat Feb 02, 2019 10:53 pm
- Forum: MegunoLink
- Topic: sending commands from my interface panel to my board
- Replies: 4
- Views: 7885
Re: sending commands from my interface panel to my board
I am working with an Ethernet shield.I figured i would go with UDP because I want meguno to broadcast commands to two ardurino network cards. Im sure i could this with TcP as well. So i am able to send a value from my number box to my mega. Cool, but it only sends one command and i need to send two ...
- Sat Feb 02, 2019 5:10 am
- Forum: MegunoLink
- Topic: sending commands from my interface panel to my board
- Replies: 4
- Views: 7885
sending commands from my interface panel to my board
So I'm having some issues writing a code to receive a value from my "number box" and put that value into an integer var within my code. I am able to make this work with command handler though my USB port but not through my UDP port.
Anyone has a clue?
Thanks
Anyone has a clue?
Thanks
- Mon Jan 14, 2019 10:22 pm
- Forum: MegunoLink
- Topic: Changing colors
- Replies: 5
- Views: 10437
Re: Changing colors
can the forecolor and backcolor be changed on the progression bar? i would like it to change colors at a preset point during the progression. The example color changing does not work. with or without the F() code.
- Fri Jan 11, 2019 7:06 pm
- Forum: MegunoLink
- Topic: Just a little help please
- Replies: 4
- Views: 9392
Re: Just a little help please
So i have learned a few things that may help others in the future. I stated that i wanted my float var to print a decimal. I learned that is you are making a calculation you can put the "." in your code line an it will send over the remaining numbers. so lets say your code reads like this:...
- Thu Jan 10, 2019 10:37 pm
- Forum: MegunoLink
- Topic: Just a little help please
- Replies: 4
- Views: 9392
Re: Just a little help please
Thanks Philr for your help with this. I was able to get the color option working. I used the example in the Meguno for that line which includs the F() clause. Now about this Decimal. i am able to get my number into the proper format for the Var called "loco". the problem is when the analog...
- Thu Jan 10, 2019 4:53 am
- Forum: MegunoLink
- Topic: Just a little help please
- Replies: 4
- Views: 9392
Just a little help please
Hello anyone out there? So I need a little help. I have written this program that will require a floating value to be sent from Arduino to Meguno. User inputs an one decimal number (23.5),into a number box. Then click a button to broadcast on the serial bus the number. Arduino receives that number (...
- Wed Jan 09, 2019 5:49 pm
- Forum: MegunoLink
- Topic: Changing colors
- Replies: 5
- Views: 10437
Re: Changing colors
Thanks for your input sir, Their is no command on the Serial bus. The code is crashing in the compiler. I notice when i type the words "SetForeColor" , this text does not change colors (orange) as it does when i type "SetNumber" or "Serial. print" it's as if Ardurino id...
- Mon Jan 07, 2019 11:08 pm
- Forum: MegunoLink
- Topic: TrackBar Transformation
- Replies: 1
- Views: 4904
TrackBar Transformation
How can I change the TrackBar into the property of the Progression Bar? I would like to use the Trackbar to receive values from my sketch and reflect the number in text box.
Thanks in advance
Thanks in advance
- Mon Jan 07, 2019 7:35 pm
- Forum: MegunoLink
- Topic: Changing colors
- Replies: 5
- Views: 10437
Changing colors
So i'm having a bit of an issue trying to figure out how to change the forecolor and backcolors of my dynamic label or progression bar. Anyone out their can give me a hand? my code is to read a pot and display the pot position. Then set a location for the motor to turn the pot to that location. I wo...