Hi,
i have a problem with MegunoLink Host Builder and my project that use UDP; in MegunoLink al working ok but when i create and install package from it is impossible use connect button (like it is not working).
Any suggestion?
Thanks
Problem with UDP and MegunoLink Host Builder
Hi Philip,
Problem with UDP now is solved as You says; adjust IP address would be very usefull but for now i don't use it.
Now i have another problem: series propriety in chart, when i build a package with Host Builder aren't the same that i have set in MegunoLink and if i set in application setting is lost between two session of use; this also i flag autosave in builder or save button.
Sorry for my poor English
Problem with UDP now is solved as You says; adjust IP address would be very usefull but for now i don't use it.
Now i have another problem: series propriety in chart, when i build a package with Host Builder aren't the same that i have set in MegunoLink and if i set in application setting is lost between two session of use; this also i flag autosave in builder or save button.
Sorry for my poor English
I'll post my email here too so everyone knows a solution for this. There is indeed a bug which will be fixed going forward but a better solution is to include the style information in the plotting message.
Hi Tullio, I tested it here and you're right it does seem to default to the same style. I suggest you modify your plotting messages to include the series properties you want.
For example
{TIMEPLOT|DATA|Cosinewave:bo-3|T|0.59}
{TIMEPLOT|DATA|Sinewave:ro-3|T|-0.36}
notice the ":bo-3" and ":ro-3"
These set the series to be blue (b) and red (r) with dashed line and circle markers.
See this page for the different styles etc
https://www.megunolink.com/documentatio ... reference/
Our Arduino library makes this even easier to build the right messages. This page has the detail
https://www.megunolink.com/documentatio ... reference/
Cheers
Phil
Hi Tullio, I tested it here and you're right it does seem to default to the same style. I suggest you modify your plotting messages to include the series properties you want.
For example
{TIMEPLOT|DATA|Cosinewave:bo-3|T|0.59}
{TIMEPLOT|DATA|Sinewave:ro-3|T|-0.36}
notice the ":bo-3" and ":ro-3"
These set the series to be blue (b) and red (r) with dashed line and circle markers.
See this page for the different styles etc
https://www.megunolink.com/documentatio ... reference/
Our Arduino library makes this even easier to build the right messages. This page has the detail
https://www.megunolink.com/documentatio ... reference/
Cheers
Phil